If your primary bathroom still revolves around a tub that mostly collects dust, you are not alone. In the NKBA 2026 Bath Trends Report, 55 percent of surveyed design professionals said a larger shower matters more than keeping a bathtub in the primary bath. Homeowners are choosing a generous shower with real seating and storage over a fixture they step into once in a while.
A conversion sounds simple, take the tub out and put a shower in, but the result depends on a handful of planning decisions made in the right order. This guide walks through them for Dallas and Fort Worth homes.
Start with the honest question: who still uses the tub?
Before anything is removed, decide what happens to bathing in the house as a whole. Many DFW households keep one tub in a hall or guest bathroom for kids, grandkids and the occasional soak, then give the primary bath fully to a shower. Others know the primary tub is the only one and think harder before letting it go.
There is no universal right answer. There is only the answer that matches how your household actually lives, which is why this question comes first, before tile samples.
Choose the entry: low threshold or curbless
This is the decision that shapes everything else.
A low-threshold shower keeps a slim entry lip, often just one to three inches high. It works within the existing floor build-up in most bathrooms, contains water easily and still removes the big step over a tub wall that makes daily use awkward.
A curbless shower removes the lip entirely, so the floor runs level from the bathroom into the shower. It looks seamless and is the easiest entry of all, which is one reason curbless showers, benches and barrier-free entries have become standard features in current bathroom design. The trade-off is construction: the shower floor needs precise slope toward the drain, and depending on the home, that can mean recessing the subfloor, working with a slab, or raising the surrounding floor. Waterproofing also extends across a larger wet zone, because no curb is there to stop stray water.
Neither option is better in the abstract. The right choice depends on your floor structure, your mobility plans and how the room is shaped. Decide it early, because it drives the drain, the glass and the floor work.
Plan inside the footprint you have
Most conversions start in a standard tub alcove, about five feet wide with walls on three sides. Working inside that footprint keeps the shower controls and drain close to where they already sit, and the finished shower still feels far roomier than the tub it replaced, because the space is open rather than walled in by a high tub side.
If you want more width, more depth or a second shower head, that usually means borrowing space from a closet or an adjoining room, which is a bigger conversation. A clear, level look at the existing footprint first keeps expectations grounded. Our bathroom remodeling service page shows how conversions fit inside a wider bathroom plan.
Water control is a system, not a single product
The part of the shower you never see decides how long it lasts. A tiled shower performs as one system: drainage, slope to the drain, substrate and continuous waterproofing working together, installed as a compatible set in the right sequence. Skipping steps or mixing pieces that were not designed to work together is how water ends up behind finished walls.
Glass is part of the same conversation. A doorless walk-in needs enough depth, and the shower head aimed away from the opening, so spray stays inside. A fixed glass panel suits many alcove conversions, while a full enclosure with a door gives the most complete splash control in a compact room. Our waterproofing and ventilation checklist covers the moisture side of this in more detail.
Details that make the shower easy every day
- A built-in bench or a fold-down seat, placed where it is easy to reach the controls
- A hand shower on a slide bar alongside the main head, useful for rinsing, cleaning and seated showering
- A recessed niche for bottles, placed out of the direct spray, instead of a corner caddy
- Controls you can reach before stepping into the water, so the first seconds are never a cold shock
- Large format tile where it fits the design, a direction the NKBA report shows designers favoring, with 89 percent preferring smaller or no grout lines on the floor for easier cleaning
- Slip-aware flooring underfoot and lighting that reaches into the shower, not just the vanity
These are small decisions with daily consequences. They are also the details that are simple to include during planning and awkward to retrofit later. If aging in place is part of your thinking, our shower remodeling page walks through the comfort and access options in one place.
A short planning order to follow
- Decide the tub question for the whole home
- Choose low threshold or curbless, based on your floor and your plans
- Confirm the footprint, then place drain, controls and glass around it
- Agree the waterproofing approach as a full system
- Pick the daily-use details: seat, hand shower, niche, lighting
- Choose finishes last, once the working decisions are settled
FAQ
Most alcove tubs can. The real questions are the floor structure under the tub, the drain position and how much space the finished shower needs to feel comfortable rather than cramped.
If anyone in the household bathes children, soaks regularly or simply wants the option, keeping a tub in a secondary bathroom is a sensible balance. If nobody uses a tub at all, the primary bath can go fully to a shower with a clear conscience.
No. Curbless is the smoothest entry and a clean look, but it asks more of the floor structure and the waterproofing. A low threshold gives most of the daily benefit with a simpler build. The best choice is the one your bathroom can support well.
Bring your priorities to an in-home visit. We will look at the existing bathroom, talk through entry, footprint and water control, and map the conversion before any finishes are chosen. See our tub to shower conversion service and our DFW bathroom planning guide for the wider picture.
